5 Most Common Problems with Washing Machines

3 min read

Whether your washing machine isn’t cleaning your clothes like it used to, or you keep finding leaks after each cycle, don’t ignore the signs that something’s wrong with your machine. Some washing machine problems can be solved very easily using a few tools or even just by tightening a hose, while others may need the work of a professional. Read casinos en ligne tips and advice on how to fix some of the more frequent faults.

1. Washing machine not starting

There are many problems that may cause a washing machine to not start. So, start with checking the main power switch for loose connections, power socket not working, if the fuse is okay etc. If this doesn’t help, check the door lock is working fine if you have a front load washing machine. In some cases, the main power switch or the control module (PCB) of the washing machine stops working. If don’t have prior experience in working with live wires and high voltages, call a repair professional to examine the washing machine.

2. Washing machine is noisy

Objects trapped in between the outer tub and drum can also be the cause of noise, things like coins and debris are extremely common to be retrieved from around the heater between the drum and they can cause damage to the machine and any clothing in it. Make sure you clear out all the pockets of cloths before putting them in the machine. With time the bearings of the washing machine also starts to degrade and become faulty causing loud noise while rotating. Operating a washing machine with faulty bearing can cause fatal damage. This can be rectified by either lubricating the bearing with grease (or oil) or by replacing them, courtesy of real money casino.

3. Excessive vibrations during operation

The most common reason for this is an unbalanced tub or the whole washing machine. Make sure the washing machine is placed on a completely horizontal surface. If not, get a stand/trolley with adjustable screws beneath. In some cases, the tub gets unbalanced due to wear and tear of the suspension system. Make sure you don’t overload the machine with cloths to prevent degradation of the suspension mechanism.

4. Washing machine making noise when draining or not draining at all

In this case, the drain pump is faulty or blocked. Blockage in the pump can happen due to accumulation of cloth fibers and dirt. Simply cleaning up the pump and the connected hose will solve the problem. It is recommended to hire a repair professional for this task as it will require dismantling the pump assembly.

5. Washing machine over-filling or under-filling

Most likely the pressure switch is not operating as intended, this can have a number of causes, either the switch is faulty, there is a hole in the pressure pipe or it has come off or the most common reason is the pressure chamber is blocked. To check the switch you have to blow into it and listen for one or more clicks if you hear them it’s fine, a close inspection of the hose should tell if it is OK or not, whereas the chamber has to be removed and washed out to clear it. If you have attached a filter in the water intake pipe, make sure the filter mesh is clean.

You May Also Like

More From Author

+ There are no comments

Add yours